Three Phase Pad Mounted Transformer

Are you looking for professional Three Phase Pad Mounted Transformer manufacturer? Then Taili Electric is a good choice for you.

Operating Conditions

1. Altitude: 1000m;

2. Ambient temperature: -35℃ ~+40℃;

3. Relative humidity: Daily average not exceeding 95%, monthly average not exceeding 90%;

4. Installation location: A location free from fire, explosion hazards, conductive dust, chemical corrosive gases, and severe vibrations;

Advantages:

1. Small size: Three Phase Pad Mounted Transformer has a compact structure, low space occupation.

2. Low cost: Without the need for high-voltage switch cabinets, cost savings achieved.

3. Easy installation: Factory-ready with basic debugging completed. Just install the base and connect the cables to operate normally.

4. Fully insulated and sealed: All high-voltage live components are immersed in oil, isolated from the outside world, with high protection level.

Technical Sheet of Three Phase Pad mounted substation

The three phase pad mounted substation is widely used due to its small size, economy and reliability:

· Urban residential communities

· Commercial centers

· Lighting for public places such as streets and parks

· Highways, airports, docks

· Temporary construction electricity

Accessories of three phase Pad-mounted Transformer

Bushing Insert	Available as single-pass or double-pass bushings, matching voltage levels (15kV, 25kV, 35kV) with corresponding pipes.
PT Elbow plug in connector	Connects underground cable to distribution power system of pad-mounted transformer, surrounding power supply branch box, cable branch box equipped with load break bushings.
Bay-O-Net Fuse with dual sensors	Used for protection against excessive current and temperature.
Bushing well & gasket	For 200 amp loadbreak interfaces.
Insulated protection cap	Protect the medium-voltage bushing during transportation.
Dual sensing Fuse	Protect distribution apparatus form damaging currents and to protect distribution systems from failed apparatus.
Load break switch	Four-position load break switch is used in different transformer feed configurations.
Transformer parts	(Oil level gauge, Vacuum manumeter ,themometer, pressure release, oil injection valve, oil drain valve,etc)

Please provide the following information, and we will be able to offer better services.